Elitech LMC-210 – Wireless charging scale 100 kg (220 lb)

Elitech LMC-210 Programmable HVAC Refrigeration Charging Scale is designed to weigh refrigerant containers in addition to charging directly into the system or recover from the system. The HVAC scale features a measuring weight capacity of 220 lbs (100kg), remote communication between scale body and Elitech Scale App or handhold controller, tough and durable platform, sealed LCD and touch-pad, long-lasting circuitry, switchable measuring units, and more. Features: 1) Wireless hand device(effective distance:10 m) and mobile software 3) Greater performance reliability and usability 4) Greatest resolution in the industry and no compromise on capacity(220 lbs) 5) Unit can switch between kg, oz and lb Weighing operation: - The scale is designed for total weight of refrigerant tank no more than 150Kg. - Take out the scale from the package, place it on firm and level surface, and press power button on the platform. - Press Wireless button on the platform. - Take out the hand-held device, press the "POWER" button on the hand-held device until the buzzer beeps once, indicating self-test is completed. - Wait until Wireless signal is connected. If yes, the screen displays Wireless icon; - Press "UNIT" to switch between "Kg", "Oz" and "Lb". - Press "ZERO" to deduct tare. - Place the refrigerant tank in the center of the scale platform; Zero it again to display the weight of refrigerant. - Observe the change of refrigerant weight in real time during charging and recovery. Troubleshooting guide: when an error code shows on the LCD screen, please contact us. E 02: Calibration error. E 05: Bluetooth is not connected successfully. E 06: Sensor failure Safety notice: - Please use the scale in specified environment to avoid error or damage of the sensor. - Please do not use chemical solvent or corrosive liquid to clean the scale. - Please do not disassemble the scale body and inner device;otherwise,it may cause great weighing error. - Please do not pull the spiral line hard in case measuring error is enlarged or the sensor damaged