FPT-261D
Close Cup Flash Point Tester, Automatic Control
Physico-chemical analysis
Price on request
Details
FPT-261
Pensky-Martens Closed Cup Flash Point Tester, FPT-261
Physico-chemical analysis
Category: Laboratory equipment · Flash point
Specifications by model
| Characteristic | Value |
|---|---|
| Heating device | Furnace body made of silicon carbide |
| Heating mode | Manual adjustment |
| Stir mode | Mechanical drive stirring |
| Stirring rate | Procedure A: (90~120) rpm |
| Oil cup | Inner diameter: 50.7~50.8 mm |
| Ignition source | Gas (or other domestic fuels, same below) |
| Thermometers (mercury-in-glass — specifications below) | Scale -5~110 °C, division 0.5 °C |
| Ambient temperature | 15~35 °C |
| Relative humidity | ≤ 85％ |
| Power supply | AC (220±10%) V, 50 Hz |
| Total power consumption | ≤650 W |
| Size | 370×320×300 mm |
| N.W. | 7 kg |
| Package dimensions | 650×455×360 mm |
| G.W. | 17.6 kg |
Full description
This closed cup flash point tester is designed and manufactured as per standards GB/T 261-2021 determination of flash point - pensky-martens closed cup method and ASTM D93 standard test method for flash point by pensky-martens closed cup tester. It is used to make determination of the closed cup flash point of the petroleum products.
Closed Cup Flash Point Tester Feature:
1. This closed cup flash point tester is designed as per GB/T261 and ASTM D93.
2. The heating power is continuously adjustable. The power is shown visually by voltmeter. The temperature control mode is advanced and reasonable.
3. The structure is designed small and exquisite. The stainless-steel table board is beautiful and easy to clean.
4. Operation is easy. Test results are precise. It has been chosen as the instrument to test the closed cup flash point by many metering and detecting institutes.
