Testo · Filtre en acier inoxydable fritté
With the sintered stainless steel filter, you protect your sensor reliably from dirt particles – even in applications in dusty atmospheres or at higher flow velocities.
Category: Measuring instruments · Filters and protective caps
Testo · testo 635-1
The testo 635-1 temperature and humidity measuring instrument enables you to measure the temperature, air humidity and dew point – in compressed air as well. State-of-the-art technology and a large selection of probes, which are available as an option, enable this wide variety of measuring possibilities.
Testo · testo 635-2
The testo 635-2 temperature and moisture meter allows you to carry out temperature and moisture measurements on a variety of different materials, surfaces and environments. This is made possible due to leading-edge technology and a wide selection of optionally available sensors.
Testo · testo 635-2 kit valeur U
The U-value is the most important value for proving the heat loss of a building. With the testo 635-2 thermohygrometer and compatible accessories from the U-value set, determining the U-value is now easier than ever.
Testo · testo 6601
The testo 6601 temperature and humidity probe is designed for monitoring critical indoor climates.
Testo · testo 6602
The testo 6602 temperature and humidity probe is designed for measurements in air conditioning ducts.
Testo · testo 6603
The testo 6603 temperature and humidity probe is designed for measurements in air conditioning ducts, is equipped with a high-precision, long-term stable humidity sensor from Testo and delivers precise measurement results.
Testo · testo 6605
The testo 6605 temperature and humidity probe is equipped with a high-precision, long-term stable humidity sensor from Testo and delivers precise measurement results.
Testo · testo 6611
The testo 6611 temperature and humidity probe is designed for monitoring critical indoor climates.
Testo · testo 6612
The testo 6612 temperature and humidity probe is designed for measurements in air conditioning ducts.
Testo · testo 6615
The testo 6615 temperature and humidity probe is designed for measurements in trace humidity applications. The automatic self-adjustment procedure corrects the measurement uncertainties that traditionally occur when measuring humidity in the lowest humidity ranges - so you benefit from extremely accurate measurement results.
Testo · testo 6617
The testo 6617 temperature and humidity probe is designed for measurements in environments with aggressive media. With the built-in self-monitoring function, you can prevent faulty measurements or measurement interruptions – because it detects signs of corrosion at an early stage, thus the probe can be replaced in good time.
Testo · Capuchon de protection en PTFE avec orifice de purge
The protective cap made of PTFE prevents damage to the sensor system caused by humidity or moisture in processes with high humidity. Thanks to the drip hole, the condensate can drain off. Optimum protection is provided by the protective cap in combination with our condensation protector.
Testo · Capuchon de protection plastique
The open plastic protection cap protects the sensor mechanically from damage by touching.
Testo · Filtre de protection métallique, Ø 12 mm
The open metal protection cap protects the sensor mechanically from damage by touching.
Testo · Filtre en tissu métallique
With the wire mesh filter, your sensor is optimally protected from coarse dirt particles and unintentional touching.
