Testo · Filtre PTFE, Ø 12 mm, pour atmosphères agressives
The PTFE sintered filter (Ø 12 mm) impresses with its water-repellent properties, high resistance to aggressive media and optimum performance at high humidity and high flow velocities.
Category: Measuring instruments · Filters and protective caps
Testo · testo 635-1
The testo 635-1 temperature and humidity measuring instrument enables you to measure the temperature, air humidity and dew point – in compressed air as well. State-of-the-art technology and a large selection of probes, which are available as an option, enable this wide variety of measuring possibilities.
Testo · testo 635-2
The testo 635-2 temperature and moisture meter allows you to carry out temperature and moisture measurements on a variety of different materials, surfaces and environments. This is made possible due to leading-edge technology and a wide selection of optionally available sensors.
Testo · testo 635-2 kit valeur U
The U-value is the most important value for proving the heat loss of a building. With the testo 635-2 thermohygrometer and compatible accessories from the U-value set, determining the U-value is now easier than ever.
Testo · Capuchon de protection en PTFE avec orifice de purge
The protective cap made of PTFE prevents damage to the sensor system caused by humidity or moisture in processes with high humidity. Thanks to the drip hole, the condensate can drain off. Optimum protection is provided by the protective cap in combination with our condensation protector.
Testo · Capuchon de protection plastique
The open plastic protection cap protects the sensor mechanically from damage by touching.
Testo · Filtre de protection métallique, Ø 12 mm
The open metal protection cap protects the sensor mechanically from damage by touching.
Testo · Filtre en acier inoxydable fritté
With the sintered stainless steel filter, you protect your sensor reliably from dirt particles – even in applications in dusty atmospheres or at higher flow velocities.
