TEMPSENS · 450 G2
450 G2 IR Pyrometer
Temperature range: 600°C to 1800°C
Price on request
Details
TEMPSENS · EL50-H
EL50-H Pyrometer
Temperature range: -20°C to 800°C
Category: Industrial sensors · Infrared pyrometers
Specifications by model
| Characteristic | Value |
|---|---|
| Temperature range | -20°C to 800°C |
| Spectral range | 8…14 μm |
| Photodetector type | Thermopile |
| Distance-to-spot ratio | 2:1 15:1 |
| Emissivity | 0.1….1.2 adjustable |
| Response time | 60 msec adjustable up to 10 sec |
| Tolerance | ±1.5% of the measured value or 3°C whichever is greater (The sensor head must be at constant ambient temperature for a minimum of 15 minutes) |
| Repeatability | 0.3% of reading in °C + 1°C |
| Analogue output | 0-20mA, 4-20mA, 0-10V, Thermocouple Type “K” or “J” (User selectable) |
| Digital output | USB 2.0 RS-232/RS-485 interface card *At a time only one digital output possible |
| Operating temperature | Electronic Box up to 70°C and Sensor Head up to 180°C |
| Power supply | 12V to 28V DC with reverse polarity protection |
| Weight | 600g 112.5mm x 82.5mm x 33mm (L x W x H) |
Full description
EL50-H is a digital Pyrometer in economic range with extended sensor head in 4 wire technology, for non-contact temperature measurement between -20°C to 800°C.The sensor head is unaffected by electromagnetic interferences. The pyrometer sensor head is specially designed to withstand ambient temperature up to 180°C without cooling. The pyrometer is equipped with a Inbuilt 4 digit LCD display which offers many signal processing features. The electronic box with integrated Keypad helps in setting parameters like Emissivity,Analog Sub range,Set point,Hysteresis (Hyst),Analog Output,Unit of temp(°C or F),Response Time,Peak Picker and Sensor address etc. Analog outputs options available are 4…20mA, 0…20mA, 0…10V, Thermocouple type “K” or “J” (user selectable) via keypad or software. RS- 232/RS-485 serial interface card is available as optional. EL50-H is provided with USB 2.0 output and PC software. The pyrometer can be powered through USB port. In this case no external power supply is required. 24 V DC is required for operation of Analog Output, RS - 232 & RS - 485 & Relay Output.
• Power supply (12V DC to 28 V DC) with reverse polarity protection
• The sensor head can withstand ambient temperature up to 180°C
• Spectral range 8 μm...14 μm
• Wide temperature ranges (-20°C to 800°C)
• Inbuilt LCD Display and Keypad for parameterisation
• Fast response time within milliseconds
• Analogue output like 4…20mA, 0…20mA, 0…10V, Thermocouple type “K” or“J” (user selectable)
• USB2.0 Digital output and RS-232/RS-485 Serial interface card
• Relay output
• User-friendly PC software for communication
