TEMPSENS · 450 G2
450 G2 IR Pyrometer
Temperature range: 600°C to 1800°C
Price on request
Details
TEMPSENS · EL50-HEx
EL50-HEx Pyrometer
Temperature range: 0°C….800°C
Category: Industrial sensors · Infrared pyrometers
Specifications by model
| Characteristic | Value |
|---|---|
| Temperature range (analogue sub-range adjustable) | 0°C….800°C |
| Spectral range | 8…14 μm |
| Photodetector type | Thermopile |
| Distance-to-spot ratio | 2:1 15:1 (To be specified while ordering) |
| Emissivity | 0.1….1.2 adjustable |
| Response time | 60 msec adjustable up to 10 sec |
| Tolerance | ±1.5% of the measured value or 2°C whichever is greater (The sensor head must be at constant ambient temperature for a minimum of 15 minutes) |
| Repeatability | 0.3% of reading in °C + 1°C |
| Analogue output | 0-20mA, 4-20mA, 0-10V, Thermocouple Type “K” or “J”(User selectable) |
| Digital output | USB 2.0 RS-232/RS-485 interface card (Optional) *At a time only one digital output is possible |
| Operating temperature | Electronic box up to 70°C Sensor head up to 180°C |
| Storage temperature | -20....60°C(Electronics & Zener), -20....180°C (Sensor Head) |
| Relay output | Relay Output with hysteresis 60V DC/42V AC RMS, 0.4A |
| Zener barriers | FM Approval: 116-0118 UL Approval: 116-0139(cULus) IECEx Approval: IECEx BAS 09.0142 IECEx BAS 17.0091x |
| Environment rating | Acc. to IEC 62529. Clamping carrier IP 20/housing IP 40 |
| Approved for | [Ex ia Ga] llC, [Ex ia Da] lllC, [Ex ia Ma] l, Ex ec llC T4 Gc |
| Software-adjustable parameters | Emissivity, Response Time, Clear Time (Peak Picker),Analog Output, Analog Scale (Sub Range), Unit temperature (°C/°F), Communication mode), Record Feature Etc. |
| Adjustable parameters and features via keypad | Emissivity, Relay, Setpoint, Hysteresis (Hyst), Analog Sub Range, Analog Output, Unit of temperature, Sensor address, Response Time, Clear Time(Peak Picker) etc. |
| Power supply | 12V DC to 28 V DC with reverse polarity protection |
| Power consumption | Max 2.5 watt |
| Installation | In zone 2, division 2 & in safe area |
| Insulation | Power supply, *Digital output, and Analog output are galvanically isolated against each other * Not applicable for USB 2.0 digital output |
| Operating humidity | 10-95%, non-condensing conditions |
| Weight | 600g, 112.5mmx82.5mmx33mm(L x W x H) |
Full description
EL50-HEx is a digital Pyrometer in economic range with extended sensor head in 4 wire technology, for non-contact temperature measurement between 0°C to 800°C. The sensor head is unaffected by electromagnetic interferences. The pyrometer sensor head is specially designed to withstand ambient temperature up to 180°C without cooling.
• Power supply (12V DC to 28 V DC) with reverse polarity protection
• The sensor head can withstand ambient temperature up to 180°C
Spectral Range: 8…14 μm
• Wide temperature ranges (0°C to 800°C)
• Analog output like 4…20mA, 0…20mA, 0…10V, Thermocouple type “K” or“J” (user selectable)
• USB2.0 Digital output and RS-232/RS-485 Serial interface card
• Relay output
Features:
Part Code: EL50-HEx
Highly Accurate Digital Pyrometer with Extended Sensor Head Suitable for Hazardous Area
Extended sensor head with 3m cable
Emissivity (ε): 0.1….1.2 adjustable
USB 2.0 Digital output, USB Cable
Technical Specification
Adjustable Mounting for Sensor Head (Reference No. – 8300-04)
Converter RS-232 ↔ RS-485 (Reference no: 9000-03)
Power supply Input 110/230V AC Output 24 V DC, 0.7Amp. (Reference No. 9000 – 02)
RS-232 / RS-485 interface card
Extra Sensor Head Extension Cable Lengths
